Skip to main content
SUPERVISOR
نوراله میرغفاری (استاد مشاور) محسن سلیمانی امین آبادی (استاد راهنما)
 
STUDENT
Hadis Parvaresh Nia
حدیث پرورش نیا

FACULTY - DEPARTMENT

دانشکده منابع طبیعی
DEGREE
Master of Science (MSc)
YEAR
1394

TITLE

Application of Chitosan and Modified Zeolite in Wastewater Treatment of Starch Production Plant
With the city's industrialization and expansion of industries day by day, concerns about the effects and harmfulness of their pollutants have increased. Consequently, the practical solutions should be considered to overcome their consequences. Industrial wastewater is one of the biggest environmental challenges to these plants.The wastewater characteristics depend on the processes of industrial plants and need different treatment approaches. Food industriesare one of the industries that have different types and consequently produce different wastewater. In this study, the wastewater treatment of Azin and Ardine flour and starch plants were investigated.Coagulation and flocculation process were used to remove organic matter in the wastewaters and as consequently wastewater treatment. The chitosan (CH) and modified zeolite with surfactant (SMZ)were used as coagulants. In order to modify zeolite, hexadecyltrimethyl ammonium surfactant (HDTMA) was used to increase its efficiency in the process of removing organic particles from wastewater. In order to do an experiment the parameters of the mixing time (0-8 minutes), pH (2-10), coagulant dose (0, 0.05, 0.1, 0.25, 0.5, 2.5 and 5 g/L of chitosan and 0, 2.5, 5, 10 and 15 g/L of modified zeolite), settling time (0, 15, 30, 45, 60, 90 and 120 minutes) and mixing time (150, 200, 250, 300 and 350 rpm) were investigated. In each step of the experiment, total suspended solids (TSS) and total dissolved solids(TDS) were measured to determine the optimal values of each parameter for each coagulant, and consequently with the optimal amount of each parameter, it was obtained that the maximum organic matter was removed at each step. The highest settlement occurred in the last stage.Results showed that CH and SMZ had a significant role in removing about 79 and 70 % of TSSand removing about 78 and 72 %of TDS from wastewater.the effectiveness of CH coagulant in removing process was more than SMZ, because the CHcould form larger and better flocs during the experiment and consequently, the settlement was more. However, for practical application of the results, the pilot tests and the economic feasibility of using these materials are recommended. Key words : Starch Wastewater, Removal of Organic Matter, Coagulation and Flocculation Process, Chitosan, Surfactant Modified Zeolite
با گسترش روز به روز صنایع و صنعتی شدن شهرها، نگرانی ها درباره ی اثرات و مضرات آلاینده های ناشی از آن ها نیز افزایش یافته است که به منظور مقابله با پیامدهای آن ها باید به دنبال راهکارهای عملی بود. پساب های تولیدی صنایع یکی از بزرگ ترین چالش های زیست محیطی آن هاست. پساب های تولیدی بر اساس صنایع مختلف ویژگی های متفاوتی دارند و راهکارهای تصفیه ی آن ها نیز متفاوت است. صنایع غذایی از جمله صنایعی هستند که پساب تولیدی آن ها با سایر صنایع متفاوت است. در این مطالعه تصفیه پساب کارخانه ی آرد و نشاسته سازی آذین و آردینه مورد بررسی قرار گرفت. به منظور حذف مواد آلی موجود در پساب و در نتیجه تصفیه ی پساب از روش انعقاد و لخته سازی استفاده شد. منعقدکننده های مورد استفاده کیتوسان و رس زئولیت اصلاح شده با سورفکتانت بود. به منظور اصلاح زئولیت از سورفکتانت هگزادسیل تری متیل آمونیوم (HDTMA) استفاده شد تا کارآیی آن در فرآیند حذف ذرات آلی از پساب افزایش یابد. به منظور انجام آزمایش پارامترهای زمان اختلاط (8-0 دقیقه)، pH(10-2)، دوز منعقدکننده (0، 05/0، 1/0، 25/0، 5/0، 5/2 و 5 گرم برلیتر کیتوسان و 0، 5/2، 5، 10 و 15 گرم برلیتر زئولیت اصلاح شده)، زمان ته نشینی (0، 15، 30، 45، 60، 90 و 120 دقیقه) و میزان اختلاط (150، 200، 250، 300 و 350 دور در دقیقه) مورد بررسی قرار گرفت. در هر مرحله از آزمایش به منظور تعیین مقادیر بهینه ی هر پارامتر برای هر منعقدکننده فاکتورهای کل جامدات معلق (TSS)و کل جامدات محلول (TDS)اندازه گیری شد و در نتیجه با به دست آمدن مقدار بهینه ی هر پارامتر شرایطی به دست آمد که مواد آلی در هر مرحله بیشتر حذف شود؛ تا جایی که بیشترین ته نشینی در مرحله ی آخر اتفاق افتاد. نتایج نشان داد که کیتوسان و زئولیت اصلاح شده به ترتیب با حذف حدود 79 و 70 درصدی TSS و حذف حدود 78 و 72 درصدی TDSاز پساب نقش مؤثری داشتند. اثربخشی منعقدکننده ی کیتوسان در فرآیند حذف بیشتر از زئولیت بود، زیرااحتمالاً در طول مراحل آزمایش کیتوسان به تشکیل شدن بهتر و بزرگ تر لخته ها کمک می کند و در نتیجه ته نشینی بیشتری صورت می گیرد. به هر صورت برای کاربرد عملی نتایج، آزمایشات پایلوت و همچنین بررسی امکان سنجی اقتصادی استفاده از مواد مذکور پیشنهاد می شود. کلمات کلیدی: پساب نشاسته، حذف مواد آلی، انعقاد و لخته سازی، کیتوسان، زئولیت اصلاح شده با سورفکتانت

ارتقاء امنیت وب با وف بومی