Skip to main content
SUPERVISOR
Mehdi Bijari,SeyedReza Hejazi taghanaki
مهدی بیجاری (استاد راهنما) سیدرضا حجازی طاقانکی (استاد مشاور)
 
STUDENT
Elham Shadkam
الهام شادکام

FACULTY - DEPARTMENT

دانشکده مهندسی صنایع
DEGREE
Doctor of Philosophy (PhD)
YEAR
1390

TITLE

Hybrid Simulation Optimization Approach Using Data Envelopment Analysis and Evolutionary Algorithm for Multi Objective Problem
Due to development of new computational technologies, simulation is becoming a very popular tool in designning of large, complex and random systems. Despite of the analytical methods are not capable of solving such problems, however, flexibility of simulation often leads to models with high computational and to obtain a statistical estimation of the system is needed to run a large number of simulations in order to replacing experiments. If the number of experiments is high, the cost of simulation is very high. Therefore, simulated optimization is an issue that has preoccupied by many researchers. Simulation Optimization conducted in the allocation of computing resources intelligently. In fact, the simulation optimization by examining a few of the experiment can achieve a near-optimal performance. The Most real-world problems are multi-objective and to achieve an optimized solution requires optimization of two or more objective function simultaneously. Traditional simulation optimization methods in the case of multi-objective are ineffective and do not cover the entire Pareto frontier. So, the new multi-objective simulation optimization methods must be created. The main purpose of this research is providing new approaches in this area which is created by a combination of tools such as: discrete event simulation, data envelopment analysis, Cuckoo Optimization Algorithm, response surface method, interactive method. The main advantage and the main reason for the popularity of hybrid simulation optimization approach are use of the benefits of all methods at the same time. Five new hybrid approaches are presented in this research, which includes interactive and non-interactive methods. These algorithms are ESCOA, SRC, two-stage PPRC, IDEA and IDRC. Due to the importance of taking into account the views of decision-makers in the process of problem solving and achieving to the preferred solutions, interactive solving methods should be established. It is noteworthy that all the proposed methods in this research are implemented and evaluated to practical problems such as supplier selection, production planning and so on. The hybrid proposed methods are presented of different points of view; each of them focuses on a part of the scope of multi-objective simulation optimization. Because to the Cuckoo Optimization Algorithm is applied in the proposed methods in this research, the improved approach of Cuckoo optimization algorithm is presented. In general, research in this study have a continuous form and new features are added to the algorithm on each approach. Improved Cuckoo Algorithm is used as optimizer in the hybrid proposed algorithms. The first three algorithms which that mentioned above, are non-interactive and interactive mode added to the extended algorithms.
با پیشرفت فناوری های جدید محاسباتی، شبیه سازی در حال تبدیل شدن به یک ابزار مناسب و رایج در طراحی و برنامه ریزی سیستم های بزرگ، پیچیده و تصادفی می باشد، این در حالی است که روش های تحلیلی از حل برخی از اینگونه مسائل عاجز می باشند. با این حال، شبیه سازی اغلب منجر به ایجاد مدل هایی با حجم محاسبات بالا میگردد و برای به دست آوردن یک برآورد آماری از سیستم، نیاز به اجرای تعداد زیادی از شبیه سازی ها برای سناریوهای مختلف می باشد. اگر تعداد طراحی های موردنظر زیاد باشد، هزینه شبیه سازی بسیار گران تمام می شود. بنابراین نیاز به بهینه سازی شبیه سازی موضوعی است که محققان و پژوهشگران بسیاری را به خود مشغول داشته است. بهینه سازی شبیه سازی تصادفی با تخصیص هوشمندانه منابع محاسباتی در آزمایشات شبیه سازی صورت می گیرد. همچنین اکثر مسائل دنیای واقعی به صورت چندهدفه هستند و برای رسیدن به جواب نیازمند بهینه‌سازی همزمان دو یا چند تابع هدف می‌باشند. روش‌های مرسوم بهینه‌سازی شبیه‌سازی در حالت چندهدفه، کارا نیستند و تمام مرز پارتو مساله را پوشش نمی‌دهند. بنابراین ضرورت ایجاد روش های بهینه سازی شبیه سازی چندهدفه جدید احساس می گردد. هدف اصلی پژوهش ارائه رویکردهایی جدید در این زمینه می‌باشد که از ترکیب ابزارهایی مانند: شبیه سازی گسسته پیشامد، تحلیل پوششی داده ها، الگوریتم بهینه‌سازی فاخته، رویه پاسخ، روش‌های تعاملی حاصل می شوند. مزیت عمده و دلیل مقبولیت رویکردهای ترکیبی بهینه سازی شبیه سازی، استفاده همزمان از مزایای تمامی روش ها به صورت همزمان می باشد. پنج رویکرد ترکیبی جدید در این پژوهش ارائه می گردند که عبارتند از الگوریتم های ESCOA، SDRC، دومرحله ایPPRC ، IGDEA و IDRC. سه الگوریتم اول به صورت غیر تعاملی و دو الگوریتم بعدی جز روش های تعاملی می باشند. با توجه به اهمیت در نظرگرفتن نظرات تصمیم گیرنده در فرآیند حل مساله و رسیدن به جواب های مرجح از طرف تصمیم گیرنده، ضرورت حل مسائل به صورت تعاملی احساس می گردد. قابل ذکر است که کلیه روش های پیشنهادی در این پژوهش برای مسایل کاربردی مانند انتخاب تامین کننده و برنامه ریزی تولید مورد پیاده سازی و بررسی قرار می گیرند و نتایج نشان دهنده برتری روش های پیشنهادی در مقایسه با روش های مشابه از نظر سرعت همگرایی، زمان حل، تعداد نقاط پارتو ایجاد شده، یکنواختی مرزهای پارتو شناسایی شده می باشد. همچنین روش های ترکیبی پیشنهادی از نقطه نظرهای مختلفی ارائه می گردند و هر یک روی بخشی از حوزه های بهینه سازی، شبیه سازی و چندهدفه تمرکز بیشتری دارند. باتوجه به کاربرد الگوریتم بهینه سازی فاخته در اکثر روش های پیشنهادی در این پژوهش، رویکرد بهبودیافته این الگوریتم ارائه می گردد و جواب های بهتری از الگوریتم بهبودیافته در مقایسه با الگوریتم اصلی به دست آمده است. در مجموع تحقیقات انجام شده در این پژوهش به صورت زنجیره ای و پیوسته می‌باشد و جنبه‌های جدیدی به الگوریتم‌ ها در هر رویکرد اضافه شده است. الگوریتم بهبودیافته فاخته ارائه شده در پژوهش در الگوریتم های پیشنهادی ترکیبی به عنوان بخش بهینه‌ساز مورد استفاده قرار می گیرد. همچنین سه الگوریتم‌ اول غیرتعاملی می‌باشند و حالت تعاملی در الگوریتم‌های بعدی به رویکردها اضافه می گردد.

ارتقاء امنیت وب با وف بومی