Skip to main content
SUPERVISOR
احمدرضا مختاری (استاد راهنما) فریماه آیتی (استاد مشاور)
 
STUDENT
Morteza Torki qasem abadi
مرتضی ترکی قاسم آبادی

FACULTY - DEPARTMENT

دانشکده معدن
DEGREE
Master of Science (MSc)
YEAR
1392

TITLE

Mineralogical and geochemical studies in Vejin and Anjireh Tiran Pb-Zn deposits for determination of geochemical pathfinders
The study on the lead and zinc mineralization in Tiran and compare it with the global lead and zinc deposits, the deposit was part of the Mississippi Valley type of deposits. Under study of geological Ore deposit is located in area of Sanandaj - Sirjan and Malayer - Isfahan of metallogeny zone. This Ore deposit include 5 stratigraphic units, which are units of the K1 (Lump lime thick layer) and K2 (sandy limestone shale) are directly related to the mineralization. Mineralization occurred by high-grade vein in the collision between the two units. Mineralization in this Ore deposit has a direct relationship with faults and fractures , So that the majority of ore mineralization located in the fault across the region and in the North West - South East which is that concurrent Zagros . The main minerals of Ore deposit are sphalerite and galena and important alteration include silicification and dolomitization. With the aim of achieving a factor to identify the fertile and infertile units, samples were take from four profiles of fertile and 2 profiles of infertile and 78 samples were analyzed ICP-MS. With classical univariate statistical analysis hierarchical cluster analysis methods, main component analysis, multiple regression principal component regression method for identifying a factor fertile units of sterilization was introduced, in the next step if the fertility of the sampled units, relationship to estimate the distance between the veins of ore samples were obtained on the basis of multi-element standards.
با مطالعه بر روی کانسار سرب و روی تیران و مقایسه ی آن با کانسارهای سرب و روی جهانی، این کانسار جزء کانسارهای تیپ دره ی می سی سی پی قرار گرفت. کانسار مورد مطالعه از لحاظ زمین شناسی در پهنه ی سنندج-سیرجان و در کمربند فلززایی ملایر –اصفهان قرار گرفته است. این کانسار 5 واحد چینه شناسی را شامل می شود که از این بین واحد های K1 (آهک توده ای ضخیم لایه) و K2 (آهک ماسه ای شیلی) ارتباط مستقیم با کانی سازی دارند. کانی سازی به صورت رگه های پرعیار در کنتاکت بین این دو واحد رخ داده است. کانی سازی در این کانسار با گسل ها وشکستگی ها رابطه ی مستقیم دارد، به صورتی که قسمت اعظم کانی سازی کانسار، در راستای گسل سراسری منطقه و در جهت شمال غرب – جنوب شرق که همروند زاگرس می باشد، قرار دارد. کانه های اصلی این کانسار اسفالریت و گالن هستند و آلتراسیون های مهم آن سیلیسی شدن و دولومیتی شدن می باشد. با هدف دستیابی به فاکتوری برای شناسایی واحدهای بارور و عقیم، از چهار پروفیل بارور و 2 پروفیل عقیم نمونه برداری انجام شد و تعداد 78 نمونه مورد آنالیز ICP-MS (56 عنصری) قرار گرفت . با انجام مطالعات آماری تک متغیره ی کلاسیک و استفاده از روش های آنالیزخوشه hy;ای سلسله مراتبی، تجزیه و تحلیل مؤلفه ی اصلی، رگرسیون چند متغیره و روش رگرسیون مؤلفه ی اصلی یک فاکتور برای شناسایی وجداکردن واحدهای بارور از عقیم معرفی شد و در گام بعد در صورت بارور بودن واحدها ی نمونه برداری شده، رابطه ای برای تخمین فاصله ی نمونه تا رگه ی کانه ساز بر اساس عیار چند عنصر حاصل شد

ارتقاء امنیت وب با وف بومی