Skip to main content
SUPERVISOR
Morteza Madhkhan
مرتضی مدح خوان (استاد راهنما)
 
STUDENT
Hasan Pasdar zadeh
حسن پاسدارزاده

FACULTY - DEPARTMENT

دانشکده مهندسی عمران
DEGREE
Master of Science (MSc)
YEAR
1389

TITLE

Study of Mechanical Properties and Durability of Roller Compacted Concrete Pavements Reinforced by TRC Composite in Magnesium Sulfate Environment
Roller compacted concrete is such as a concrete with zero slump that is compacted by rollers. Nowadays, it is increasingly utilized for pavements of concrete roads. Reinforcing this concrete with armature is impossible due to a lot of limitations. For this reason, researchers have been always about to find a method for improving ductility and flexural resistance. Using a layer of fine grained concrete that reinforced by glass fiber textile (T.R.C), on the tensile side of the roller compacted concrete increases the ductility and fuxural resistance of the roller compacted concrete noticeably. T.R.C is a composite that includes two parts. The first part is the concrete with fine grain and second one is knitting glass fiber textiles. Performance of roller compacted concrete that reinforced with this composite firstly depends on bonding between textile and fine grained concrete in the T.R.C and secondly depends on the bonding between T.R.C and roller compacted concrete under imposed forces. In this research, Mechanical Proprties and Durability of Roller Compacted Concrete Pavements Reinforced By TRC Composite have been Studied. Durability of Roller Compacted Concrete that Reinforced with this Way Investigated in 5% Magnesium Sulfate solution. Knitting glass fiber textiles are resistant against alkaline environments and fine grained concrete is used with different pozzolanes including meakaoline and silica fume. The soil method was used to find the mix design of roller compacted concrete in pavement. For compacting concrete, the kango vibrating hammer has been used. Required optimum moisture value for mix design and finally the mix design of RCCP was obtained. Construction of experimental specimens had two phases. At the first phase, the TRC was placed at bottom of the mold and at the second one, the RCCP was compacted on it. The specimens used in this research have prismatic shapes with dimension of 100*100*350 mm and experimental test on specimens is 4-points toughness test according to ASTMC1018 standard. Results show that reinforcing roller compacted concrete by TRC improves the mechanical Properties of roller compacted concrete . Rupture modulus and ultimate deflection increase 53 and 101 Percent respectively. Speciments show high resistance against magnesium sulfate environment in different times. Using silica fume and metakaoline in fine grained concrete in TRC for reinforcing roller compacted concrete with this composite improved the durability and flexural performance of roller compacted concrete. Key words : Roller compacted concrete, TRC, fiber glass textile, fine grained concrete, silica fume, metakaoline, 4-pointed toughness test.
بتن غلتکی بتنی است بدون اسلامپ که به وسیله غلتک متراکم میشود و با توجه به مزایای آن به طور گسترده در اجرای روساز ی جادههای بتنی مورد استفاده قرار میگیرد.تسلیح بتن غلتکی توسط آرماتور به علت شرایط خاص اجرای آن امکانپذیر نیست. به همین علت محققین درصدد راهی جهت بهبود خصوصیات شکلپذیری و مقاومت خمشی آن بودهاند. استفاده از الیاف فولادی به عنوان جزئی از طرح اختلاط باعث افزایش زیاد شکلپذیری شده، اما بر مدول گسیختگی تأثیر چندانی ندارد. در این راستا استفاده از لا ی ه نازک بتن در وجه کششی نمونههای بتنی غلتکی، مقاومت خمشی و شکلپذیری را تا ،( T.R.C) ریزدانه مسلح شده با شبکههای بافته شده از الیاف بتن کامپوزیتی است که از دو بخش شامل شبکههای بافته شده از الیاف و بتن ریزدانه تشک یل شده T.R.C . حد زیادی افزایش میدهد است. عملکرد بتن غلتکی مسلح شده با این کامپوزیت در درجه اول به چسبندگی بین شبکه الیاف و بتن ریزدانه در کامپوزیت و در درجه دوم به چسبندگی و پیوستگی بین کامپوزیت و بتن غلتکی تحت بارهای وارده بستگی دارد. در این تحقیق، علاوه بر بررسی خصوصیات مکانیکی بتن غلتکی تسلیح شده به این روش، دوام بتن غلتکی تسلیح شده با این کامپوزیت در محیط سولفات منیزیم با غلظت 5 درصد در 3 و 6 ماهه مورد بررسی قرار گرفت. الیاف استفاده شده، الیاف شیشه مقاوم در برابر محیط های قلیایی می باشد و بتن ، سه بازه زمانی 1 ریزدانه با اندازهی سنگدانهی کمتر از 1 میلیمتر در طرح اختلاطهای مختلف شامل متاکائولین و میکروسیلیس به کار رفته است. نمونههای 350 میلیمتر ساخته شده که بر روی آنها آزمایش خمش چهار نقطهای، مطابق با *100* خمشی مسلح شده در وجه کششی، در ابعاد 100 و با استفاده از دستگاه طاقت خمشی انجام گرفته است. نتایج حاصل از این تحقیق نشان می دهد تسلیح بتن ASTM C استاندارد 1018 غلتکی به این روش باعث بهبود مشخصات مکانیکی بتن غلتکی میشود؛ به طوری که میزان افزایش مدول گسیختگی و بار نهایی به ترتیب مقاومت بالایی از خود در محیط سولفات منیزیم 5 ،T.R.C تا 53 و 101 درصد بوده است. نمونههای خمشی بتن غلتکی تسلیح شده با درصد، در بازههای زمانی مختلف نشان میدهند. همچنین نتایج به دست آمده حاکی از این است که استفاده از متاکائولن و میکروسیلیس در طرح اختلاط بتن ریزدانه، علاوه بر بهبود مقاومت خمشی و شکلپذیری نمونهها، باعث افزایش دوام بتن غلتکی تسلیح شده با این روش در محیط سولفات منیزیم شده است. الیاف شیشه، میکروسیلیس، متاکائولین، آزمایش خمش چهارنقطهای ،T.R.C ، کلمات کلیدی: بتن غلتکی روسازی، بتن ریزدانه

ارتقاء امنیت وب با وف بومی